On the given page the list of accessible cranes only one day 12.06.22 (!).
We updates the list of cranes not less than 2 times per week, therefore our offers are always actual approximately on 99 %.
If you have not found any crane it is enough only ASK US that we have offered you a variant.
Under requests of owners we give the information on some cranes only by direct inquiry of the buyer.
Capacity | Mark/Model | Manufactured | Wheel formula | Hours/Mileage | Boom/Jib | Additions | Price |
---|---|---|---|---|---|---|---|
All terrain cranes | |||||||
20 ton |
|||||||
20 | Krupp KMK 2020 | 1994 | 4x4x4 | n/d | 20m/3,8m | on request | |
20 | Grove GMK 2020 | 1996 | 4x4x4 | 12900/108000 | 20.5m/3.8m | good condition | |
25 ton |
|||||||
25 | Liebherr LTM 1025 | 1990 | 4x4x4 | 12000/97500 | 26m/14m | on request | |
25 | Liebherr LTM 1025 | 1991 | 4x4x4 | n/d | 26m | on request | |
25 | Krupp KMK 2025 | 1991 | 4x4x4 | 15300/62700 | 23m/13m | on request | |
25 | Liebherr LTM 1025 | 1992 | 4x4x4 | 17500/86600 | 26m/14,5m | on request | |
25 | PPM ATT 290 | 1993 | 4x4x4 | 15500/131000 | 27,4m | on request | |
25 | Liebherr LTM 1025 | 1993 | 4x4x4 | 13600/65000 | 26m/8m | on request | |
25 | PPM ATT 290 | 1993 | 4x4x4 | 15500/131000 | 27,4m | on request | |
25 | Liebherr LTM 1025 | 1994 | 4x4x4 | n/d | 26m/8m | on request | |
25 | Liebherr LTM 1025 | 1995 | 4x4x4 | 13600/118000 | 26m/14,4m | on request | |
25 | Liebherr LTM 1025 | 1997 | 4x4x4 | n/d | 26m/8m | on request | |
25 | Demag AC 75 | 1997 | 4x4x4 | n/d | 25.3m | good condition | |
25 | Demag AC 75 | 1997 | 4x4x4 | n/d | 25.3m | good condition | |
25 | Terex Demag AC 25 | 1999 | 4x4x4 | n/d | 25,3m/13m | on request | |
25 | Terex Demag AC 25 | 2000 | 4x4x4 | n/d | 25,3m/13m | on request | |
25 | Terex Demag AC 25 City | 2002 | 4x4x4 | 11000/82000 | 25,3m | Êðþê 25 ton | |
30 ton |
|||||||
30 | Liebherr LTM 1030 | 1991 | 4x4x4 | 16000/72500 | 26m/14m | on request | |
30 | Kato KA 300-E | 1991 | 4x4x4 | n/d | 26m/7,3m | on request | |
30 | Liebherr LTM 1030 | 1992 | 4x4x4 | 17200/79300 | 26m/14m | on request | |
30 | Tadano AR 300-E | 1993 | 4x4x4 | n/d | 26m/7,5m | on request | |
30 | PPM ATT 340 | 1994 | 4x4x4 | n/d | 30m | on request | |
30 | Liebherr LTM 1030/1 | 1994 | 4x4x4 | n/d | 26m/8,2m | on request | |
30 | Faun ATF 30-2 | 1995 | 4x4x4 | n/d | 25,3m | on request | |
30 | Liebherr LTM 1030/1 | 1995 | 4x4x4 | n/d | 26m/8,2m | on request | |
30 | PPM ATT 340 | 1995 | 4x4x4 | 14000/87500 | 30,4 | on request | |
30 | Liebherr LTM 1030-1 | 1997 | 4x4x4 | 6500/43000 | 30m/15m | on request | |
30 | Liebherr LTM 1030-2 | 1998 | 4x4x4 | 11200/121500 | 30m/15m | on request | |
30 | Faun ATF 30-2L | 1998 | 4x4x4 | n/d | 28,5m/12,2m | on request | |
30 | Liebherr LTM 1030-2 | 1998 | 4x4x4 | 11200/121500 | 30m/15m | on request | |
30 | Faun ATF 30-2 | 1999 | 4x4x4 | n/d | 25,3m/13m | on request | |
30 | PPM ATT 350 | 1999 | 4x4x4 | n/d | 30,4 | on request | |
30 | Tadano-Faun ATF 30-2L | 2000 | 4x4x4 | 21500/195000 | 28m/7,5m | Ïðîòèâîâåñ - 5,6 ton, hook - 20, 4 ton | |
30 | PPM ATT 300 | 2000 | 4x4x4 | 13700/42000 | 27,4m/15m | on request | |
30 | Liebherr LTM 1030-2 | 2001 | 4x4x4 | n/d | 30m/14m | on request | |
30 | Demag AC 30 City | 2002 | 4x4x4 | 8700/68400 | 25.0m/13m | on request | |
30 | Liebherr LTM 1030-2 | 2002 | 4x4x4 | n/d | 30m/15m | on request | |
30 | Tadano-Faun ATF 30-2L | 2003 | 4x4x4 | 3900/28000 | 30m | on request | |
30 | Demag AC 30 | 2003 | 4x4x4 | n/d | 25.0m/13m | good condition | |
30 | Faun ATF 30-2L | 2004 | 4x4x4 | 4900/23000 | 30m/14m | on request | |
30 | Liebherr LTM 1030-2.1 | 2006 | 4x4x4 | n/d | 30m/15m | on request | |
30 | Demag AC 30 City | 2007 | 4x4x4 | n/d | 25.0m | on request | |
30 | Demag AC 30 City | 2009 | 4x4x4 | n/d | 25.0m | new | |
35 ton |
|||||||
35 | PPM ATT 380 | 1991 | 4x4x4 | n/d | 30,4m/15m | on request | |
35 | Liebherr LTM 1030-2 | 1994 | 4x4x4 | 12350/62600 | 30m/15m | on request | |
35 | PPM ATT 390 | 1995 | 4x4x4 | 20200/154000 | 30m/14m | hook 1-3 shave, ball | |
35 | Grove GMK 2035 | 1996 | 4x4x4 | n/d | 29m | on request | |
35 | Grove GMK 2035 | 1997 | 4x4x4 | n/d | 29m/15m | on request | |
35 | PPM ATT 400 | 1997 | 4x4x4 | n/d | 30m/15m | on request | |
35 | Grove GMK 2035 | 1998 | 4x4x4 | n/d | 29m/15m | on request | |
35 | Liebherr LTM 1030-2 | 1998 | 4x4x4 | 8300/78900 | 30m/15m | on request | |
35 | PPM ATT 400 | 1998 | 4x4x4 | 13000/55000 | 30m/15m | hook 1-3 shave, ball | |
35 | PPM ATT 400 | 1998 | 4x4x4 | 15600/101500 | 30m/15m | on request | |
35 | Grove GMK 2035 | 1999 | 4x4x4 | 10800/91000 | 29m | on request | |
35 | Liebherr LTM 1030-2 | 1999 | 4x4x4 | 10000/59500 | 30m/15m | on request | |
35 | Grove GMK 2035 | 2000 | 4x4x4 | 11800/113000 | 29m | on request | |
35 | Liebherr LTM 1030-2 | 2000 | 4x4x4 | n/d | 30m/15m | on request | |
35 | Liebherr LTM 1030-2 | 2001 | 4x4x4 | 6980/45600 | 30m/15m | on request | |
35 | Liebherr LTM 1030-2 | 2002 | 4x4x4 | n/d | 30m/15m | on request | |
35 | PPM ATT 400-3 | 2002 | 4x4 | n/d | 30,5m/8m | on request | |
35 | Demag AC 35 | 2003 | 4x4x4 | n/d | 30,4m/15m | on request | |
35 | Liebherr LTM 1030-2 | 2003 | 4x4x4 | 7200/42000 | 30m | on request | |
35 | Liebherr LTM 1030-2 | 2003 | 4x4x4 | 5300/103000 | 30m/15m | on request | |
35 | Grove GMK 2035 | 2004 | 4x4x4 | 9700/57000 | 29m | on request | |
35 | Demag AC 35 L | 2005 | 4x4x4 | 5400/29500 | 37,4m | on request | |
35 | Grove GMK 2035 | 2005 | 4x4x4 | 4900/38000 | 29m/8-15m | on request | |
35 | Demag AC 35 | 2006 | 4x4x4 | n/d | 30,4m | on request | |
35 | Grove GMK 2035 | 2006 | 4x4x4 | 5000/50000 | 29m/8-15m | hook - 5, 20 ton | |
35 | Demag AC 35 L | 2007 | 4x4x4 | n/d | 37,4m/8m | on request | |
35 | Liebherr LTM 1030-2.1 | 2007 | 4x4x4 | n/d | 30m/15m | on request | |
35 | Demag AC 35 L | 2008 | 4x4x4 | n/d | 37,4m | on request | |
40 ton |
|||||||
40 | Liebherr LTM 1040/1 | 1991 | 6x4x6 | n/d | 30m/14,5m | on request | |
40 | Faun RTF 40-3 | 1992 | 6x6x6 | n/d | 30m/15m | on request | |
40 | Liebherr LTM 1040 | 1992 | 6x4x6 | n/d | 30m/14,5m | on request | |
40 | Liebherr LTM 1040-3 | 1993 | 6x4x6 | 26000/164000 | 30m/14,5m | good condition | |
40 | Liebherr LTM 1040-3 | 1993 | 6x4x6 | /52000 | 30m/14,5m | on request | |
40 | Faun RTF 40-3 | 1993 | 6x6x6 | 20700/198000 | 30m/15m | on request | |
40 | Liebherr LTM 1040 | 1995 | 6x4x6 | 16700/105000 | 30m/14,5m | on request | |
40 | Faun RTF 40-3 | 1995 | 6x6x6 | n/d | 30m | on request | |
40 | Liebherr LTM 1040 | 1997 | 6x6x6 | n/d | 30m/14,5m | on request | |
40 | PPM ATT 390 | 1997 | 4x4x4 | 16400/64200 | 30m/15m | on request | |
40 | Demag AC 95 | 1997 | 6x6x6 | n/d | 32,8m/9m | on request | |
40 | Demag AC 40-1 | 1998 | 6x6x6 | 15500/150000 | 31m/runner | on request | |
40 | Liebherr LTM 1040-1 | 1998 | 6x6x6 | n/d | 30m/15m | on request | |
40 | Faun RTF 40-3 | 1999 | 6x6x6 | 13600/95000 | 30m/15m | good condition | |
40 | PPM ATT 400 | 1999 | 4x4x4 | 13100/33500 | 30m/15m | on request | |
40 | PPM ATT 400 | 1999 | 4x4x4 | 12700/60000 | 30m/15m | on request | |
40 | Demag AC 40 City | 1999 | 6x4x6 | 11000/41900 | 31,2m/13m | hook - 1 shave + ball | |
40 | PPM ATT 400 | 2000 | 4x4x4 | 8000/27000 | 30m/15m | on request | |
40 | Faun RTF 40-3 | 2000 | 6x6x6 | n/d | 30m/15m | on request | |
40 | Demag AC 40-1 | 2000 | 4x4x4 | n/d | 31,2m/13m | on request | |
40 | Demag AC 40 City | 2000 | 6x4x6 | 16800/42000 | 31,2m/13m | on request | |
40 | Demag AC 40 | 2001 | 4x4x4 | n/d | 31,2m/13m | on request | |
40 | Faun RTF 40-3 | 2001 | 6x6x6 | n/d | 30m/15,5m | on request | |
40 | PPM ATT 400 | 2001 | 4x4x4 | n/d | 30m/15m | on request | |
40 | Demag AC 40 City | 2002 | 6x4x6 | n/d | 32m | on request | |
40 | Demag AC 40 | 2003 | 4x4x4 | n/d | 31,2m/13m | on request | |
40 | Terex Demag AC 40-1 | 2005 | 4x4x4 | n/d | 31,4m/13m | on request | |
40 | Demag AC 40 | 2005 | 4x4x4 | n/d | 31,2m/13m | on request | |
40 | Terex Demag AC 40 city | 2006 | 4x4x4 | n/d | 31,4m/13m/1,2 heavy duty jib | on request | |
40 | Grove GMK 2035 | 2007 | 4x4x4 | 750/2900 | 29m/8-15m | on request | |
40 | Liebherr LTM 1040-2.1 | 2007 | 4x4x4 | 13100/97000 | 35m/9m | Telma, êðþê - 3 shave | |
40 | Tadano-Faun ATF 40G-2 | 2007 | 4x4x4 | 16800/84000 | 35,2m/9m | on request | |
40 | Terex Demag AC 40-1 | 2007 | 4x4x4 | 2300/26400 | 31,4m | on request | |
40 | Demag AC 40 City | 2007 | 6x4x6 | n/d | 31,2m/1,2m heavy duty jib | remote control as new | |
40 | Liebherr LTM 1040-2.1 | 2008 | 4x4x4 | n/d | 35m/9m | new | |
40 | Liebherr LTM 1040-2.1 | 2008 | 4x4x4 | n/d | 35m | on request | |
40 | Faun ATF 40 G-2 | 2008 | 4x4x4 | n/d | 35m/9m | on request | |
40 | Terex Demag AC 40 L | 2008 | 4x4x4 | n/d | 37,4m/8m | on request | |
40 | Demag AC 40 City | 2009 | 6x6x6 | n/d | 31,2m/13m | new | |
40 | Demag AC 40 City | 2009 | 6x6x6 | n/d | 31,2m/13m/1,2m heavy duty jib | new | |
45 ton |
|||||||
45 | Liebherr LTM 1045 | 1990 | 6x6x6 | n/d | 38m/18m | on request | |
45 | Krupp KMK 3045 | 1991 | 6x6x6 | n/d | 32m/13m | on request | |
45 | Krupp KMK 3045 | 1992 | 6x6x6 | n/d | 32m/13m | on request | |
45 | PPM ATT 530 | 1992 | 6x6x6 | 17200/108000 | 31m/14m | on request | |
45 | Krupp KMK 3045 | 1993 | 6x6x6 | n/d | 32m/13m | on request | |
45 | Faun ATF 45-3 | 2002 | 6x6x6 | 7500/65000 | 34m | on request | |
45 | Liebherr LTM 1045/1 | 2002 | 6x6x6 | 4200/62000 | 34m/9,2m/1,4W | on request | |
45 | Liebherr LTM 1045/1 | 2003 | 6x6x6 | n/d | 36m/16m | on request | |
45 | Faun ATF 45-3 | 2004 | 6x6x6 | 5200/17000 | 34m/15m | on request | |
45 | Faun ATF 45-3 | 2005 | 6x6x6 | 5100/26000 | 34m/15m/runner | 3 hook | |
45 | Faun ATF 45-3 | 2006 | 6x6x6 | 2600/20000 | 34m/15m | on request | |
50 ton |
|||||||
50 | Faun RTF 50-4 | 1990 | 8x8x8 | n/d | 39m/8,5m | very good condition | |
50 | Liebherr LTM 1050-4 | 1990 | 8x6x8 | n/d | 38.0m/16m | good condition | |
50 | Faun RTF 50-4 | 1990 | 8x8x8 | n/d | 39m/16m | very good condition | |
50 | Liebherr LTM 1050-4 | 1991 | 8x6x8 | n/d | 38.0m/16m | good condition | |
50 | Liebherr LTM 1050-4 | 1992 | 8x6x8 | 14500/125000 | 38.0m/16m | good condition | |
50 | Krupp KMK 3050 | 1994 | 6x6x6 | n/d | 38m/15m | on request | |
50 | Demag AC-155 | 1994 | 6x4x6 | 17500/125000 | 40m/17m | good condition | |
50 | Tadano Faun ATF 50-3 | 1995 | 6x6x6 | 15100/108000 | 32,6m/16m | on request | |
50 | Liebherr LTM 1050-1 | 1995 | 6x6x6 | 14500/80300 | 40m/10-16m | on request | |
50 | Demag AC-155 | 1996 | 6x4x6 | 8300/85000 | 40m/17,6 | good condition, 2 hook | |
50 | Liebherr LTM 1050-1 | 1996 | 6x4x6 | 11000/86000 | 40m/18m | good condition | |
50 | Tadano Faun ATF 50-3 | 1996 | 6x6x6 | 11800/114600 | 38,6m/15m | on request | |
50 | Tadano Faun ATF 50-3 | 1997 | 6x6x6 | 13000/110000 | 38,6m/15m | on request | |
50 | Grove GMK 3050 | 1997 | 6x6x6 | n/d | 38,1m/15m | on request | |
50 | Demag AC-155 | 1997 | 6x4x6 | 14500/98800 | 40m/17,6 | good condition, 2 hook | |
50 | PPM ATT 600 | 1998 | 6x6x6 | n/d | 40m/15m | on request | |
50 | Liebherr LTM 1050/1 | 1998 | 6x6x6 | n/d | 40m/16m | on request | |
50 | Tadano Faun ATF 50-3 | 1998 | 6x4x6 | 14500/72800 | 38,6m/15m | on request | |
50 | Grove GMK 3050 | 1998 | 6x6x6 | n/d | 38,1m/15m | on request | |
50 | Demag AC 50 | 1999 | 6x6x6 | 10300/58000 | 40m/17,6m | on request | |
50 | Grove GMK 3050 | 1999 | 6x6x6 | n/d | 38,1m/15m | on request | |
50 | PPM ATT 600 | 1999 | 6x6x6 | 16500/85000 | 40m/15m | on request | |
50 | Liebherr LTM 1050/1 | 1999 | 6x6x6 | 11500/81000 | 40m/16m | as new | |
50 | Demag AC 50 | 2000 | 6x6x6 | n/d | 40m/17,6m | on request | |
50 | Grove GMK 3050 | 2000 | 6x6x6 | n/d | 38,1m/15m | on request | |
50 | Tadano Faun ATF 50-3 | 2000 | 6x6x6 | 13000/69000 | 38,6m/16m | on request | |
50 | PPM ATT 600 | 2000 | 6x6x6 | n/d | 42m/14.75m | on request | |
50 | Liebherr LTM 1050-1 | 2000 | 6x6x6 | 7500/46800 | 40m/16m | on request | |
50 | Demag AC 50 | 2001 | 6x6x6 | 10500/95000 | 40m/17,6m | on request | |
50 | Demag AC 50 | 2001 | 6x6x6 | 11000/61000 | 40m/17,6m | on request | |
50 | Grove GMK 3050 | 2001 | 6x6x6 | n/d | 38,1m/15m hydraulicàâëè÷. | on request | |
50 | Liebherr LTM 1050-1 | 2001 | 6x6x6 | n/d | 40m/16m | on request | |
50 | Liebherr LTM 1050-1 | 2001 | 6x6x6 | n/d | 40m | on request | |
50 | Grove GMK 3050 | 2002 | 6x6x6 | 10000/46200 | 38,1m/15m | on request | |
50 | Tadano Faun ATF 50-3 | 2002 | 6x6x6 | 8250/43600 | 38,6m/16m | on request | |
50 | Demag AC 50-1 | 2002 | 6x6x6 | n/d | 40m/17,6m | on request | |
50 | Grove GMK 3050 | 2003 | 6x6x6 | 7400/39700 | 38,1m/15m | on request | |
50 | Demag AC 50-1 | 2003 | 6x6x6 | 6100/36300 | 40m/19,6m | 2 winch | |
50 | Grove GMK 3050 | 2004 | 6x6x6 | n/d | 38,1m/15m | on request | |
50 | Demag AC 50 | 2005 | 6x6x6 | n/d | 40m/17,6m | on request | |
50 | Demag AC 50-1 | 2006 | 6x6x6 | 2000/33000 | 40m/9,2m | 1 winch, êðþê 32 ton | |
50 | Grove GMK 3050 | 2006 | 6x6x6 | n/d | 38,1m/15m | on request | |
50 | Terex Demag AC 50 | 2007 | 6x6x6 | n/d | 40m/17,6m | on request | |
50 | Grove GMK 3050-1 | 2007 | 6x6x6 | n/d | 38,1m/15m | on request | |
50 | Liebherr LTM 1050-3.1 | 2008 | 6x6x6 | n/d | 40m/15m | as new | |
50 | Tadano Faun ATF 50 G-3 | 2008 | 6x6x6 | n/d | 40m/16m | counterweight 10 ton | |
50 | Liebherr LTM 1050-3.1 | 2009 | 6x6x6 | n/d | 40m/15m | new | |
50 | Tadano Faun ATF 50 G-3 | 2009 | 6x6x6 | n/d | 40m/16m | new | |
55 ton |
|||||||
55 | Terex PPM ATT 600 | 1998 | 6x6x6 | n/d | 40m +16m | on request | |
55 | Liebherr LTM 1055 | 2001 | 6x6x6 | n/d | 40m/16m | on request | |
55 | Liebherr LTM 1055 | 2002 | 6x6x6 | 8100/40000 | 40m/16m | on request | |
55 | Liebherr LTM 1055 | 2003 | 6x6x6 | 7700/42900 | 40m/16m | on request | |
55 | Grove GMK 3055 | 2004 | 6x6x6 | 4900/55000 | 43m/15m | on request | |
55 | Liebherr LTM 1055 | 2004 | 6x6x6 | n/d | 40m | on request | |
55 | Grove GMK 3055 | 2005 | 6x6x6 | n/d | 43m/15m hydraulic | on request | |
55 | Grove GMK 3055 | 2006 | 6x6x6 | 4000/43500 | 43m/15m | on request | |
55 | Demag AC 55L | 2006 | 6x6x6 | 3200/23000 | 44m/15m | 2 winch, Telma | |
55 | Demag AC 55L | 2007 | 6x6x6 | 1200/7500 | 44m/15m | 2 winch | |
55 | Grove GMK 3055 | 2007 | 6x6x6 | 2900/31000 | 43m/15m hydraulic | 2 hook, counterweight 11,6 ton | |
55 | Liebherr LTM 1055 | 2007 | 6x6x6 | 4500/55000 | 40m/16m | Telma, A/C, very good condition | |
55 | Demag AC 55L | 2008 | 6x6x6 | n/d | 44m/15m | 2 winch, new | |
55 | Terex PPM AC 55 | 2008 | 6x6x6 | n/d | 44m +15m | 2 winch, A/C | |
55 | Grove GMK 3055 | 2009 | 6x4x6 | n/d | 43m/15m hydraulic | new | |
60 ton |
|||||||
60 | PPM ATT 680 | 1990 | 6x6x6 | n/d | 38m +10m | on request | |
60 | Krupp KMK 4060 | 1991 | 8x8x8 | 22800/44000 | 35m | on request | |
60 | Faun RTF 60-4 | 1993 | 8x6x8 | 15000/66000 | 40m/16m | on request | |
60 | Liebherr LTM 1060 | 1995 | 8x6x8 | 9200/82500 | 40m/16m | good condition | |
60 | Liebherr LTM 1060-1 | 1998 | 8x6x8 | 12750/99000 | 42m/17m | counterweight 12 ton | |
60 | Faun ATF 60-4 | 1999 | 8x6x8 | 8800/98000 | 42m/19m | on request | |
60 | Liebherr LTM 1060 | 1999 | 8x6x8 | 10300/98000 | 42m/17m | counterweight 12 ton | |
60 | Liebherr LTM 1060/2 | 1999 | 8x6x8 | 14700/125000 | 42m/16m | 2 hook, tyres 50% | |
60 | Terex PPM ATT 600 | 2000 | 6x6x6 | n/d | 40m +16m | on request | |
60 | Faun ATF 60-4 | 2000 | 8x6x8 | n/d | 40,2m/16m | on request | |
60 | Liebherr LTM 1060/2 | 2000 | 8x6x8 | 8800/115000 | 42.0m/17.0m | very good condition | |
60 | Faun ATF 60-4 | 2001 | 8x6x6 | 10500/75000 | 40,2m/16m | 1 winch, hook 6, 32 ton | |
60 | Liebherr LTM 1060-2 | 2001 | 8x6x8 | 11100/54200 | 42m/16m | on request | |
60 | Faun ATF 60-4 | 2002 | 8x6x8 | n/d | 40,2m/16m | on request | |
60 | Faun ATF 60-4 | 2002 | 8x6x8 | n/d | 40,2m/16m | on request | |
60 | Faun ATF 60-3 | 2003 | 6x6x6 | 6500/39000 | 40,2m/16m | on request | |
60 | Liebherr LTM 1060-2 | 2003 | 8x6x8 | 6800/108000 | 42m/17m | on request | |
60 | Terex Demag AC 60 | 2003 | 6x6x6 | 6400/102000 | 50m/14m/runner | hook - 37,6, 5,5 ton | |
60 | Demag AC 60 City | 2004 | 6x6x6 | n/d | 50.4/14,4 | on request | |
60 | Demag AC 60 City | 2004 | 6x6x6 | n/d | 50.4 | on request | |
60 | Faun ATF 60-3 | 2004 | 6x6x6 | n/d | 40,2m/16m | on request | |
60 | Liebherr LTM 1060-2 | 2004 | 8x6x8 | 7500/67500 | 42m/17m | on request | |
60 | Faun ATF 60-4 | 2004 | 8x6x8 | 6600/10500 | 40,2m/2m heavy duty jib | 2 winch, 3 hook | |
60 | Faun ATF 60-3 | 2006 | 6x6x6 | 4000/16000 | 40,2m/16m | on request | |
60 | Faun ATF 60-3 | 2008 | 6x6x6 | n/d | 40,2m | on request | |
60 | Faun ATF 60-3 | 2009 | 6x6x6 | n/d | 40,2m/16m | on request | |
65 ton |
|||||||
65 | Faun RTF 65-4 | 1994 | 8x6x8 | n/d | 40m | on request | |
65 | Faun ATF 65 G-4 | 2005 | 8x6x8 | 9700/49200 | 44m/16m | Telma | |
65 | Tadano-Faun ATF 65 G-4 | 2007 | 8x6x8 | 12600/132000 | 44m/16m | Êðþê 3 shave, counterweight - 15 ton | |
65 | Faun ATF 65 G-4 | 2008 | 8x6x8 | n/d | 44m/16m | Telma,Xenon | |
65 | Faun ATF 65 G-4 | 2009 | 8x6x8 | n/d | n/d | new | |
70 ton |
|||||||
70 | Liebherr LTM 1070 | 1990 | 8x8x8 | 21000/170000 | 42m/18m | good condition | |
70 | Liebherr LTM 1070 | 1992 | 8x6x8 | n/d | 42m/18m | on request | |
70 | Krupp KMK 4070 | 1993 | 8x8x8 | 22500/93000 | 38.1m/10-16m | êðþê 70 ton | |
70 | Liebherr LTM 1070 | 1993 | 8x6x8 | 4800/54500 | 42m/17m | on request | |
70 | Liebherr LTM 1070 | 1994 | 8x6x8 | n/d | 42m/17m | on request | |
70 | Liebherr LTM 1070 | 1995 | 8x6x8 | ?/7800/132800 | 40m/16m | on request | |
70 | Liebherr LTM 1070/1 | 1997 | 8x6x8 | n/d | 40m/16m | on request | |
70 | Faun ATF 70-4 | 1997 | 8x6x8 | 9500/97000 | 40,5m/16m | on request | |
70 | Faun ATF 70-4 | 1998 | 8x6x6 | 14400/85000 | 40,5m/16m | on request | |
70 | Liebherr LTM 1070 | 1998 | 8x6x8 | n/d | 40m/16m | on request | |
70 | Grove GMK 4070 | 1998 | 8x8x8 | n/d | 40m/17m | on request | |
70 | Grove GMK 4070-1 | 1999 | 8x8x8 | n/d | 38m | on request | |
70 | Tadano-Faun ATF 70-4 | 2000 | 8x6x8 | 19950/132000 | 40,5m/16m | Ïðîòèâîâåñ - 12 ton, hook - 3 shave, 1 shave | |
70 | Faun ATF 70-4 | 2001 | 8x8x8 | n/d | 40,5m/16m | on request | |
70 | Liebherr LTM 1070-4.1 | 2005 | 8x6x8 | 4400/104000 | 50m/16m | hook - 5,7, 16,38 ton | |
70 | Liebherr LTM 1070-4.1 | 2006 | 8x6x8 | 3900/40500 | 50m/17m | 3 hook, 2 winch, 2 A/Cà, very good condition | |
70 | Liebherr LTM 1070-4.1 | 2006 | 8x6x8 | 1300/9600 | 50m/17m | on request | |
70 | Demag AC 70 City | 2006 | 8x8x8 | 6000/45000 | 52m/14m/runner | 2 winch | |
70 | Liebherr LTM 1070-4.1 | 2007 | 8x6x8 | 4200/15300 | 50m/16m | 2 winch | |
70 | Liebherr LTM 1070-4.2 | 2008 | 8x4x8 | n/d | 50m/16m | Telma, xenon | |
70 | Liebherr LTM 1070-4.1 | 2008 | 8x6x8 | 860/6700 | 50m/16m | Telma, xenon | |
70 | Liebherr LTM 1070-4.1 | 2008 | 8x8x8 | 380/7000 | 50m/16m | Telma, xenon | |
70 | Liebherr LTM 1070-4.2 | 2009 | 8x6x8 | 180/1900 | 50m/16m | Telma, xenon | |
70 | Liebherr LTM 1070-4.2 | 2009 | 8x6x8 | 900/21900 | 50m/16m | Telma, xenon | |
70 | Tadano-Faun ATF 70G-4 | 2016 | 8x6x8 | 4960/20920 | 52m/16m | Ïðîòèâîâåñ - 16 ton, 3 hook | |
75 ton |
|||||||
75 | Grove GMK 4075 | 2001 | 8x8x8 | n/d | 43.2m/17m | hook - 8, 40 ton | |
75 | Grove GMK 4075 | 2002 | 8x8x8 | 9400/41800 | 43.2m/17m | on request | |
75 | Grove GMK 4075 | 2003 | 8x8x8 | 7200/50000 | 43.2m/17m | on request | |
75 | Grove GMK 4075 | 2004 | 8x8x8 | 5900/36900 | 43.2m/27m | 2 winch | |
75 | Grove GMK 4075 | 2005 | 8x8x8 | 3900/15500 | 43.2m/17m | on request | |
80 ton |
|||||||
80 | Krupp KMK 4080 | 1992 | 8x8x8 | n/d | 42m/17m | on request | |
80 | Krupp KMK 4080 | 1993 | 8x6x8 | n/d | 43m/13m | counterweight 16 ton | |
80 | Demag AC 205 | 1994 | 8x8x8 | n/d | 51m/17m | on request | |
80 | Krupp KMK 4080 | 1995 | 8x6x8 | n/d | 43m/13m | counterweight 16 ton | |
80 | Demag AC 205 | 1995 | 8x6x8 | 18300/126400 | 50m/10m | 2 hook, ðåìîíò boom-> 2006, Allison -> 2005 | |
80 | Demag AC 205 | 1996 | 8x8x8 | n/d | 50m/17m | on request | |
80 | Grove GMK 4080 | 1996 | 8x6x8 | n/d | 43.2m/13m | on request | |
80 | Faun RTF 80 | 1996 | 8x6x8 | n/d | 42m/16m | on request | |
80 | Demag AC 205 | 1997 | 8x8x8 | n/d | 50m/18m | on request | |
80 | Grove GMK 4080 | 1997 | 8x6x8 | n/d | 43.2m/17m | on request | |
80 | Grove GMK 4080 | 1998 | 8x6x8 | n/d | 43.2m/17m | on request | |
80 | Demag AC 205 | 1998 | 8x6x6 | 15500/104000 | 50m/17m | hook 15, 65 ton | |
80 | Liebherr LTM 1080/1 | 1998 | 8x6x8 | 10100/68700 | 48m/19m luffing/2,6m runner | 2 winch, Telma | |
80 | Liebherr LTM 1080/1 | 1998 | 8x8x8 | 13000/130000 | 48m/19m luffing/2,6m runner | 2 winch, Telma | |
80 | Liebherr LTM 1080/1 | 1999 | 8x6x8 | 9500/118000 | 48.0m/10-19m | very good condition | |
80 | Demag AC 80-1 | 1999 | 8x6x8 | 13000/108000 | 50m/17m | on request | |
80 | Demag AC 80 | 2000 | 8x8x8 | 12000/80000 | 50m/17m | 1 winch, hook -5,5, 38,5 ton | |
80 | Demag AC 80-2 | 2001 | 8x6x8 | 12600/85000 | 50m/17m | on request | |
80 | Grove GMK 4075 | 2001 | 8x6x8 | 5700/52000 | 43.2m/17m hydraulic | on request | |
80 | Liebherr LTM 1080-1 | 2001 | 8x6x8 | 11200/66000 | 48m/19m | on request | |
80 | Liebherr LTM 1080/1 | 2002 | 8x6x8 | 9400/35000 | 48m/19m | Ïðîòèâîâåñ 16 ton, çàïàñêà, Euro 3 | |
80 | Liebherr LTM 1080/1 | 2002 | 8x6x8 | n/d | 48m | on request | |
80 | Demag AC 80-1 | 2003 | 8x6x8 | 7800/26000 | 50m/17m | 2 winch | |
80 | Liebherr LTM 1080/1 | 2003 | 8x6x8 | 7500/39000 | 48m/19m | on request | |
80 | Demag AC 80 | 2004 | 8x6x8 | n/d | 50m/17m | on request | |
80 | Liebherr LTM 1080 | 2004 | 8x6x8 | n/d | 48m/19m | on request | |
80 | GROVE GMK 4075 | 2004 | 8x8x8 | 5900/36900 | 43.2m/17m+2x5m | 2 winch | |
80 | Demag AC 80-1 | 2005 | 8x6x8 | 2400/27000 | 50m/17m | on request | |
80 | GROVE GMK 4075 | 2005 | 8x8x8 | 6400/40500 | 48m/17m | on request | |
80 | GROVE GMK 4080 | 2006 | 8x6x8 | 5800/44000 | 51m/15m | hook - 8, 40 ton | |
80 | Faun ATF 80 G-4 | 2006 | 8x6x8 | n/d | 48m/16m | on request | |
80 | Tadano-Faun ATF 80G-4 | 2006 | 8x6x8 | 9600/136000 | 48m | hook - 40, 6 ton, counterweight - 18 ton | |
80 | Demag AC 80-2 | 2007 | 8x8x8 | n/d | 50m/17,6m | on request | |
80 | Faun ATF 80 G-4 | 2007 | 8x6x8 | n/d | 48m/16m | on request | |
80 | GROVE GMK 4080 | 2008 | 8x6x8 | 400/7500 | 51m/15m | on request | |
80 | Demag AC 80 | 2008 | 8x8x8 | n/d | 50m/17m | on request | |
80 | GROVE GMK 4080-1 | 2009 | 8x8x8 | n/d | 51m/15m | on request | |
90 ton |
|||||||
90 | Liebherr LTM 1090 | 1991 | 10x6x10 | 13200/150000 | 45m/19m | good condition | |
90 | Krupp KMK 5090 | 1992 | 8x8x8 | n/d | 41m/16m | on request | |
90 | Liebherr LTM 1090/1 | 1993 | 8x6x8 | n/d | 45m/19m | on request | |
90 | Liebherr LTM 1090/1 | 1995 | 8x6x8 | n/d | 50m/19m | on request | |
90 | Liebherr LTM 1090/1 | 1996 | 8x8x8 | 10600/76500 | 50m/19m | on request | |
90 | Liebherr LTM 1090/1 | 1997 | 8x6x8 | 8400/70000 | 52m/19m | on request | |
90 | Liebherr LTM 1090/2 | 1998 | 8x6x8 | 8900/62000 | 52m/19m | on request | |
90 | Liebherr LTM 1090-2 | 1999 | 8x6x8 | 4000/87000 | 52m/19m | on request | |
90 | Tadano Faun ATF 90 | 1999 | 8x8x8 | /65800 | 42m/16m | 2 winch | |
90 | Liebherr LTM 1090 | 2000 | 8x8x8 | 6600/60000 | 52m/19m | 2 winch | |
90 | Liebherr LTM 1090-2 | 2001 | 8x8x8 | n/d | 52m/19m | on request | |
90 | Liebherr LTM 1090-2 | 2002 | 8x8x8 | 7700/71500 | 52m/19m/2,7m heavy duty jib | 2 winch, hook - 22, 50 ton, tyres 60%, very good condition | |
90 | Liebherr LTM 1090-3 | 2004 | 8x8x8 | n/d | 50m/19m | on request | |
90 | Liebherr LTM 1090-4 | 2008 | 8x8x8 | 2200/7300 | 50m/2m runner | on request | |
90 | Faun ATF 90 G-4 | 2009 | 8x8x8 | n/d | 51,2m/18m hydraulicé | new | |
90 | Liebherr LTM 1090.4-1 | 2009 | 8x8x8 | 6000/95000 | 50m/19m | on request | |
95 ton |
|||||||
95 | Liebherr LTM 1095-5.1 | 2005 | 10x8x8 | 3400/21100 | 58m/19m+7m | ||
95 | Liebherr LTM 1095-5.1 | 2006 | 10x8x10 | 4100/47000 | 58m/19m | êðþê 38 ton + ball, counterweight 23 ton | |
95 | Liebherr LTM 1095-5.1 | 2007 | 10x8x8 | 1200/7000 | 58m/19m+7m hydraulic | counterweight 23 ton, 3 hook - 38,3 , 16,9 , 5,7 ton, as new | |
95 | Liebherr LTM 1095-5.1 | 2008 | 10x8x8 | 1400/15000 | 58m/19m hydraulic | 3 hook, A/C | |
100 ton |
|||||||
100 | Demag AC 265 | 1991 | 10x8x8 | 6300/40000 | 45m/33m | on request | |
100 | Liebherr LTM 1100/1 | 1995 | 10x8x8 | n/d | 52m/19m | on request | |
100 | Liebherr LTM 1090/2 | 1999 | 8x8x8 | 10.500/45000 | 52m/19m | Euro 3, new engine | |
100 | Demag AC 100 | 2000 | 10x8x8 | 10400/75700 | 50m/17,6m | counterweight 32 ton | |
100 | Grove GMK 5100 | 2001 | 10x6x10 | 8000/55000 | 51m/18m | Êðþê 8 ton | |
100 | Demag AC 100 | 2001 | 10x8x8 | 4700/50000 | 50m/17,6m | counterweight 32 ton, hook 7, 32 ton | |
100 | Liebherr LTM 1100-2 | 2001 | 10x8x8 | n/d | 52m/19m | on request | |
100 | Liebherr LTM 1100-2 | 2002 | 10x8x8 | 9500/88200 | 52m/19m | 2 winch | |
100 | Demag AC 100 | 2003 | 10x8x8 | 9250/ | 50m/17m | 3 hook | |
100 | Liebherr LTM 1100-4 | 2003 | 8x8x8 | 7200/79500 | 52m/19m | Euro 3, hook - 7,5, 55 ton | |
100 | Liebherr LTM 1100 | 2003 | 10x8x8 | 5100/27000 | 52m | on request | |
100 | Grove GMK 5100 | 2003 | 10x8x10 | 6600/52000 | 51m/18m/2X8,0m hydraulic | 2 hook, counterweight 31 ton | |
100 | Liebherr LTM 1100-4 | 2004 | 8x6x8 | 4900/32000 | 52m/19m | 3 hook, very good condition | |
100 | Grove GMK 5100 | 2004 | 10x8x10 | n/d | 51m/18m | 3 hook | |
100 | Demag AC 100 | 2004 | 10x8x10 | n/d | 50m/33m | on request | |
100 | Demag AC 100 | 2005 | 10x8x8 | 5200/20900 | 50m/17m | on request | |
100 | Grove GMK 5100 | 2005 | 10x8x10 | n/d | 51m/38m | on request | |
100 | Liebherr LTM 1100 | 2005 | 10x8x10 | 5000/89000 | 52m/19m hydraulic | on request | |
100 | Liebherr LTM 1100 | 2005 | 10x8x10 | 5000/89000 | 52m/19m hydraulic | on request | |
100 | Liebherr LTM 1100-4 | 2006 | 8x6x8 | 3800/22300 | 52m/19m | 2 winch | |
100 | Liebherr LTM 1100 | 2006 | 10x8x10 | 2500/21400 | 52m/19m | 2 hook, very good condition | |
100 | Grove GMK 4100 | 2006 | 8x6x8 | 6000/60000 | 52m/17m hydraulic | hook - 40, 8 ton, counterweight 26,1 ton | |
100 | Demag AC 100 | 2006 | 10x8x8 | 1400/17300 | 50m/17m | counterweight 32 ton, 2 hook | |
100 | Grove GMK 5095 | 2006 | 10x6x10 | n/d | 60m/22m | on request | |
100 | Liebherr LTM 1100-5.2 | 2007 | 10x8x8 | 3800/8000 | 52m/19m | hook 8,8, 59 ton, Telma, as new! | |
100 | Grove GMK 4100L | 2007 | 8x8x8 | n/d | 60m | on request | |
100 | Grove GMK 5095 | 2008 | 10x6x10 | 300/2500 | 60m/22m | on request | |
100 | Grove GMK 5095 | 2008 | 10x6x10 | n/d | 60m/17m | counterweight 15,4+11,8 ton, two hook 8, 40 ton, 2 winch, Telma, new | |
100 | Grove GMK 4100L | 2008 | 8x8x8 | 600/6000 | 60m/22m | A/C, Telma | |
100 | Demag AC 100/4 | 2008 | 8x8x8 | n/d | 50m/19m | on request | |
100 | Demag AC 100 | 2008 | 10x8x8 | n/d | 50m/17m | counterweight 32 ton | |
100 | Demag AC 100/4 | 2008 | 8x6x8 | n/d | 50m/17m | on request | |
100 | Grove GMK 4100L | 2009 | 8x8x8 | 600/3000 | 60m | on request | |
100 | Grove GMK 4100L | 2009 | 8x6x8 | n/d | 60m/17m | "Russian" package, new | |
100 | Demag AC 100 | 2009 | 10x8x8 | n/d | 50m/17m | new | |
100 | Demag AC 100/4 | 2009 | 8x6x8 | n/d | 50m/17m | new | |
100 | Grove GMK 5095 | 2009 | 10x6x10 | 300/1600 | 60m/17m hydraulic /3,5m heavy duty jib | counterweight 15,4+11,8 ton, 2 winch, hook 8, 40 ton, Telma | |
100 | Grove GMK 4100L | 2013 | 8x6x8 | n/d | 60m/17m | on request | |
100 | Grove GMK 4100L | 2019 | 8x6x8 | 1000/10200 | 60m/17m | counterweight 26 ton, hook - 3shave, ball, A/C, Telma, as new | |
110 ton |
|||||||
110 | Krupp KMK 5110 | 1991 | 10x6x8 | 20600/96000 | 50m/16m | 2 hook, good condition | |
110 | Krupp KMK 5110 | 1995 | 10x6x8 | n/d | 46m/32m | on request | |
110 | Faun ATF 110 G-5 | 2005 | 10x8x8 | 2500/26000 | 52m/16m | counterweight 35 ton, 2 hook | |
110 | Faun ATF 110 G-5 | 2006 | 10x8x8 | 1600/28400 | 52m/19m | on request | |
110 | Faun ATF 110 G-5 | 2006 | 10x8x8 | 2500/30000 | 52m/30m | hook - 10, 25, 63 ton | |
110 | Faun ATF 110 G-5 | 2008 | 10x8x8 | 720/14600 | 52m/16m | 2 winch, 2 hook + ball | |
110 | Tadano-Faun ATF 110 G-5 | 2009 | 10x8x8 | 10900/880 ÷àñîâ | 52m/16m | counterweight - 35 ton, hook - 10,63 ton | |
120 ton |
|||||||
120 | Liebherr LTM 1120 | 1991 | 10x6x8 | 7000/11000 | 42m/30m | on request | |
120 | Liebherr LTM 1120 | 1992 | 10x6x8 | n/d | 42m/30m | on request | |
120 | Krupp KMK 5120 | 1994 | 10x8x10 | n/d | n/d | on request | |
120 | Liebherr LTM 1120-1 | 1995 | 10x6x8 | n/d | 56m/21m | on request | |
120 | Demag AC 395 | 1996 | 10x8x8 | 13500/52000 | 60m/17m | 1 winch, 2 hook, counterweight 30 ton | |
120 | Faun ATF 120 | 1997 | 10x8x10 | n/d | 50m/16m | on request | |
120 | Demag AC 395 | 1997 | 10x8x8 | 9000/170000 | 60m/17m | 2 hook, A/C, very good condition | |
120 | Liebherr LTM 1120-1 | 1997 | 10x6x8 | 12970/97000 | 56m/21m | on request | |
120 | Demag AC 120 | 1998 | 10x8x8 | 11900/93000 | 60m/17m | counterweight 38 ton, 1 winch | |
120 | Demag AC 120 | 1998 | 10x6x8 | 9300/89200 | 60m/17m | on request | |
120 | Demag AC 120 | 2000 | 10x8x8 | 13600/30000 | 60m/18m | on request | |
120 | Demag AC 120 | 2000 | 10x8x8 | 9900/65000 | 60m/17m | 2 hook, counterweight 28 ton | |
120 | Liebherr LTM 1120 | 2000 | 10x6x8 | n/d | 56m/18m | on request | |
120 | Demag AC 120 | 2001 | 10x8x8 | 8600/57600 | 60m/17m | 3 hook | |
120 | Demag AC 120 | 2002 | 10x8x10 | 6000/ | 60m/17m | 1 winch, 3 hook | |
120 | Demag AC 120 | 2005 | 10x8x8 | n/d | 60m/17m | on request | |
120 | Demag AC 120 | 2006 | 10x8x8 | 2500/25000 | 60m/33m hydraulic | on request | |
120 | Demag AC 120 | 2007 | 10x8x8 | 2700/17200 | 60m/2,5m | 2 winch, 2 hook | |
120 | Liebherr LTM 1120 | 2008 | 10x6x8 | n/d | n/d | on request | |
120 | Demag AC 120 | 2008 | 10x8x8 | 300/3850 | 60m/33m | 2 winch | |
120 | Grove GMK 5120 | 2008 | 10x8x10 | 210/2700 | 51m/34m hydraulic | 2 winch, counterweight 31 ton, 3 hook, as new | |
120 | Demag AC 120-1 | 2008 | 10x8x8 | 800/7000 | 60m/17m | counterweight 40 ton, 1 winch, hook - 8, 55 ton | |
120 | Demag AC 120-1 | 2009 | 10x8x8 | n/d | 60m/17m | counterweight 40 ton, hook - 8, 32, 80 ton | |
120 | Demag AC 120-1 | 2009 | 10x6x8 | n/d | 60m/33m | new | |
130 ton |
|||||||
130 | Grove GMK 5130 | 1998 | 10x8x10 | n/d | 60m/18m | on request | |
130 | PPM ATT 1354 | 1999 | 10x6x10 | n/d | 53m/19m | on request | |
130 | Grove GMK 5130 | 2005 | 10x8x10 | n/d | 60m/18m | on request | |
130 | Grove GMK 5130 | 2006 | 10x8x10 | 4400/39400 | 60m/32m | counterweight 40 ton, hook - 8, 50 ton, 1 winch | |
130 | Liebherr LTM 1130-5.1 | 2008 | 10x6x8 | n/d | 60m/19m | on request | |
130 | Grove GMK 5130-2 | 2008 | 10x6x10 | n/d | 60m/18m hydraulic | on request | |
130 | Grove GMK 5130-2 | 2009 | 10x8x10 | n/d | 60m/18m+8õ2m | winter package - 30 + "ðîññèéñêèé" package, A/C, ðåòàðäåð, new | |
130 | Tadano-Faun ATF 130G-5 | 2010 | 10x8x10 | 9600/78000 | 60m/18m | A/C | |
130 | Grove GMK 5130-2 | 2013 | 10x8x10 | n/d | 60m/18m | on request | |
140 ton |
|||||||
140 | Krupp KMK 5140 | 1992 | 10x6x10 | 14000/100000 | 49m/20m | on request | |
140 | Krupp KMK 5140 | 1993 | 10x6x10 | 14000/100000 | 49m/18m | on request | |
140 | Demag AC 140 | 2004 | 10x8x8 | 5000/33000 | 64m/33m | 2 winch | |
140 | Demag AC 140 | 2005 | 10x8x8 | 1500/42000 | 64m/33m | 2 winch | |
140 | Demag AC 140 | 2006 | 10x8x8 | 1500/42000 | 64m/33m | 2 winch | |
140 | Demag AC 120-1 | 2008 | 10x8x8 | 300/2000 | 60m/17m | on request | |
150 ton |
|||||||
150 | Demag AC 435 | 1992 | 10x6x8 | n/d | 50m/17m | on request | |
150 | Demag AC 435 | 1993 | 10x6x8 | 10900/86000 | 50m/17m | on request | |
150 | Liebherr LTM 1150 | 2001 | 10x6x8 | n/d | 56m/21m+2x7m | counterweight 50 ton, Euro 3 | |
150 | Liebherr LTM 1150 | 2002 | 10x6x8 | n/d | 56m/21m+7m | counterweight 50 ton | |
150 | Liebherr LTM 1150 | 2004 | 10x8x10 | 6500/47400 | 56m/21m | 2 hook, counterweight 47 ton | |
150 | Liebherr LTM 1150 | 2005 | 10x6x8 | n/d | 56m/21m | on request | |
150 | Grove GMK 5150L | 2019 | 10x6x10 | 1600/20000 | 60m/18m | counterweight 44 ton, êðþê 3 ùêèâà, 1 winch, as new | |
160 ton |
|||||||
160 | Liebherr LTM 1160-2 | 1993 | 12x8x10 | n/d | 55m/39m | on request | |
160 | Liebherr LTM 1160-2 | 1997 | 10x8x8 | 11400/63000 | 60m/36m | on request | |
160 | Liebherr LTM 1160-2 | 1998 | 10x8x8 | 18000/129100 | 60m | counterweight 50 ton | |
160 | Liebherr LTM 1160-2 | 1998 | 10x8x8 | n/d | 60m/36m | on request | |
160 | Liebherr LTM 1160-2 | 1999 | 10x8x8 | n/d | 60m/36m | on request | |
160 | Liebherr LTM 1160-2 | 2000 | 10x8x8 | 4500/46000 | 60m/36m | 2 winch, hook - 10, 68 ton, counterweight 50 ton | |
160 | Liebherr LTM 1160-2 | 2000 | 10x8x10 | n/d | 60m/36m | counterweight 50 ton | |
160 | Liebherr LTM 1160-2 | 2001 | 10x6x8 | 4700/36000 | 60m/36m | on request | |
160 | Liebherr LTM 1160 | 2002 | 10x8x10 | 5200/31200 | 60m/36m | counterweight 50 ton, 2 winch, êðþê 58 ton + ball | |
160 | Liebherr LTM 1160/2 | 2002 | 10x8x10 | 2900/58000 | 60m/29m | on request | |
160 | Demag AC 160 | 2004 | 10x8x8 | n/d | 64m/33m | on request | |
160 | Demag AC 160 | 2005 | 10x8x8 | n/d | 64m/17m | on request | |
160 | Liebherr LTM 1160-5.1 | 2006 | 10x8x10 | 3000/14000 | 62m/22m | on request | |
160 | Liebherr LTM 1160-5.1 | 2006 | 10x6x8 | 2700/22200 | 62m/43m | 2 winch | |
160 | Demag AC 160 | 2007 | 10x8x8 | n/d | 64m/33m | on request | |
160 | Liebherr LTM 1160-5.1 | 2007 | 10x6x8 | 1350/18000 | 62m/22m | counterweight 46 ton | |
160 | Faun ATF 160 G-5 | 2008 | 10x8x8 | n/d | 60/13,2m | on request | |
160 | Liebherr LTM 1160-5.1 | 2008 | 10x6x8 | 1400/10800 | 62m/22m | on request | |
160 | Faun ATF 160 G-5 | 2009 | 10x8x8 | n/d | 60/34m | new | |
160 | Demag AC 160 | 2009 | 10x8x8 | n/d | 64m/33m | new | |
160 | Liebherr LTM 1160-5.1 | 2009 | 10x8x8 | n/d | 62m/22m | counterweight 46 ton, new | |
160 | Tadano-Faun ATF 160G-5 | 2010 | 10x8x8 | 12500/95000 | 60/13,2m | hook - 10,63 ton, counterweight - 51 ton, A/C, crashíîå óïðàâëåíèå | |
170 ton |
|||||||
170 | Grove GMK 5170 | 2008 | 10x8x10 | 1600/17000 | 64m/21m | 2 hook | |
170 | Grove GMK 5170 | 2009 | 10x8x10 | n/d | 64m/21m | new | |
180 ton |
|||||||
180 | Demag AC 180 | 1997 | 12x6x8 | 14200/37400 | 60m/38m | 2 winch | |
180 | Demag AC 180 | 1998 | 12x6x8 | 12600/37500 | 60m/38m | 2 winch | |
180 | Demag AC 180 | 1999 | 12x6x8 | n/d | 60m/38m (fixed) | counterweight 64 ton, hook 5 shave, 3 shave, ball | |
180 | Grove GMK 5180 | 2000 | 10x8x10 | 5000/75000 | 60m/22m | on request | |
180 | Grove GMK 5180 | 2000 | 10x8x10 | 10300/131000 | 60m/38m | counterweight 63 ton, hook - 80, 32 ton | |
180 | Demag AC 180 | 2000 | 10x8x8 | n/d | 60m/36m | on request | |
180 | Grove GMK 5180 | 2001 | 10x8x10 | 11200/75600 | 60m/22m | counterweight 63 ton, 1 winch | |
200 ton |
|||||||
200 | Liebherr LTM 1200 | 1990 | 12x8x10 | n/d | 54m/45m luffing | good condition | |
200 | Liebherr LTM 1200 | 1991 | 12x8x10 | n/d | 54m/42m fixed/63m luffing | good condition, new painting | |
200 | Demag AC 200 | 2000 | 10x8x8 | 7000/60000 | 60m/20m | on request | |
200 | Liebherr LTM 1200 | 2002 | 10x8x8 | 4000/72000 | 60m/36m | 2 winch | |
200 | Liebherr LTM 1200-1 | 2002 | 10x8x8 | 8700/67700 | 60m/36m | very good condition | |
200 | Demag AC 200 | 2003 | 10x8x8 | n/d | 68m/33m/1,65m runner | 2 winch, counterweight 69 ton, 2 hook | |
200 | Liebherr LTM 1200/1 | 2003 | 10x8x10 | 6000/30000 | 60m/42m | 3 hook, counterweight 69 ton | |
200 | Demag AC 200 | 2004 | 10x8x8 | 6100/25000 | 68m/33m | Telma, tyres 80%, very good condition | |
200 | Grove GMK 5200 | 2004 | 10x8x10 | 2800/30000 | 60m/22m | on request | |
200 | Demag AC 200-1 TP | 2004 | 12x8x10 | 5600/2300/40500 | 67.8m/17m/33m (fixed) | êðþê 69 ton, additional trailer for counterweight | |
200 | Demag AC 200 | 2004 | 10x8x8 | 1700/23500 | 68m/33m | 2 winch | |
200 | Grove GMK 5200 | 2005 | 10x8x10 | 6000/34000 | 60m/22m hydraulic | on request | |
200 | Demag AC 200 | 2005 | 10x8x8 | n/d | 68m/17m | on request | |
200 | Liebherr LTM 1200 | 2006 | 10x8x8 | 4400/44700 | 72m/22m | 2 winch, hook - 10,5, 31, 71 ton, good condition | |
200 | Demag AC 200 | 2007 | 10x8x8 | 2500/25000 | 68m/17m | counterweight 69 ton | |
200 | Liebherr LTM 1200-5.1 | 2007 | 10x8x10 | 2700/13200 | 72m/43m | very good condition | |
200 | Liebherr LTM 1200-5.1 | 2008 | 10x8x8 | 3100/21000 | 72m/22m | hook 143ton - 7 shave, 31,2 ton - 1 shave, 10,5 ton, counterweight 72 ton, very good condition | |
200 | Demag AC 200-1 | 2008 | 10x8x8 | 360/9800 | 68m/38m | as new | |
200 | Liebherr LTM 1200-5.1 | 2009 | 10x8x8 | n/d | 72m/22m | new | |
200 | Demag AC 200-1 | 2009 | 10x8x8 | 50/500 | 68m/17m | new, counterweight 69 ton, 1 winch, hook - 10, 67 ton | |
200 | Liebherr LTM 1200-5.1 | 2009 | 10x8x8 | 380/3800 | 72m+7m/36m | on request | |
220 ton |
|||||||
220 | Grove GMK 6220 L | 2003 | 12x8x12 | 3300/52000 | 72m/38m | on request | |
220 | Liebherr LTM 1220 | 2005 | 10x8x8 | n/d | 60m/43m | on request | |
220 | Liebherr LTM 1220 | 2006 | 10x8x8 | n/d | 60m/36m | on request | |
220 | Faun ATF 220 G-5 | 2007 | 10x8x10 | 2700/28500 | 68m/37m | êîíòðîëü íàãðóçêè on àóthreeããåðû | |
220 | Grove GMK 5220 | 2007 | 10x8x10 | 3700/18000 | 68m/23m | 2 winch, 2 hook | |
220 | Liebherr LTM 1220-5.1 | 2007 | 10x8x8 | 1300/4000 | 60m/22m+7m | as new | |
220 | Liebherr LTM 1220-5.1 | 2007 | 10x8x8 | 250/3500 | 60m/22m+7m | as new | |
220 | Liebherr LTM 1220-5.1 | 2008 | 10x8x8 | 740/3500 | 60m/22m | as new, 2 winch | |
220 | Grove GMK 5220 | 2008 | 10x8x10 | 2200/18000 | 68m/21m hydraulic | on request | |
220 | Faun ATF 220 G-5 | 2008 | 10x8x10 | 2000/10800 | 68m/37m | on request | |
220 | Grove GMK 5220 | 2009 | 10x8x10 | n/d | 68m/21m | new | |
220 | Liebherr LTM 1220-5.2 | 2009 | 10x8x8 | n/d | 60m/22m | on request | |
220 | Tadano-Faun ATF 220G-5 | 2014 | 10x8x10 | 5400/35000 | 68m/13m | counterweight - 71 ton | |
220 | Tadano-Faun ATF 220 G-5 | 2015 | 10x8x10 | 6400/178000 | 68m/13m | counterweight - 71 ton, hook - 100, 25 ton, Telma | |
225 ton |
|||||||
225 | Liebherr LTM 1225 | 1995 | 12x8x10 | 11500/36000 | 60m/42m + superlift | 2 hook, 2 winch,counterweight 80 ton | |
225 | Liebherr LTM 1225 | 1997 | 12x8x10 | n/d | 60m/36m | on request | |
225 | Liebherr LTM 1225 | 1999 | 12x8x10 | 9300/58500 | 60m/42m | on request | |
250 ton |
|||||||
250 | Demag AC 665 SSL | 1996 | 12x8x8 | n/d | 57,9m/65m | on request | |
250 | Demag AC 665 SSL | 1996 | 12x6x10 | n/d | 57,9m/41m/63m | standard complete set | |
250 | Grove GMK 6250 | 1999 | 12x8x12 | 10350/81200 | 60m/62m fixed | counterweight 100 ton, very good condition | |
250 | Grove GMK 6250 | 1999 | 12x8x12 | 8800/2500/37500 | 60.0m/19.0m | êðþê 100 ton, good condition | |
250 | Liebherr LTM 1250 | 2002 | 12x8x10 | 6700/49600 | 72m/22m | on request | |
250 | Liebherr LTM 1250/1 | 2003 | 12x8x10 | n/d | 72m/22m+2x7m | on request | |
250 | Liebherr LTM 1250 | 2004 | 12x8x10 | 4400/68000 | 72m/36m/3,4m heavy duty jib | 2 winch, counterweight 97,5 ton, good condition | |
250 | Liebherr LTM 1250 | 2005 | 12x8x10 | n/d | 72m/36m | counterweight 97,5 ton, hook 1,3,7 shave | |
250 | Liebherr LTM 1250 | 2005 | 12x8x10 | 4200/30800 | 72m/22m | hook 21, 70 ton | |
250 | Demag AC 250 | 2006 | 12x8x8 | 4800/35000 | 72m/42m/70m luffing | counterweight 97 ton, hook - 108,71,10,5 ton | |
250 | Liebherr LTM 1250 | 2006 | 12x8x10 | 3100/43000 | 72m/22m | counterweight 97,5 ton, 1 winch | |
250 | Liebherr LTM 1250 | 2006 | 12x8x10 | 4800/36000 | 72m/42m fixed/70m luffing jib | hook - 10,5, 71, 108 ton, counterweight 97,5 ton | |
250 | Liebherr LTM 1250-6.1 | 2007 | 12x8x10 | n/d | 72m/42m/70 luffing jib | on request | |
250 | Demag AC 250 | 2007 | 12x8x10 | n/d | 80m/36m | counterweight 97 ton, hook - 125,80,12,5 ton | |
250 | Demag AC 250 | 2008 | 12x8x10 | 380/1300 | 80m/28m | Telma, xenon, A/C | |
250 | Liebherr LTM 1250-6.1 | 2008 | 12x8x10 | 780/5800 | 72m/22m+2x7m | counterweight 85 ton, 3 hook, çàïàñêà, as new | |
250 | Demag AC 250-1 | 2009 | 12x8x10 | n/d | 80m/28m | new | |
250 | Liebherr LTM 1250-6.1 | 2009 | 12x8x10 | n/d | 72m/22m | new | |
300 ton |
|||||||
300 | Liebherr LTM 1300 | 1991 | 14x8x10 | n/d | 60m/70m | on request | |
300 | Liebherr LTM 1300 | 1995 | 14x8x10 | 19800/189000 | 60m/42m fixed jib/70m luffing jib | counterweight 90 ton | |
300 | Demag AC 300 | 1998 | 12x6x8 | n/d | 59m/41m fixed/65m luffing | good condition | |
300 | Liebherr LTM 1300-1 | 1999 | 12x8x10 | n/d | 60m/42m fixed jib/70m luffing jib | on request | |
300 | Liebherr LTM 1300-1 | 1999 | 12x8x10 | n/d | n/d | standard complete set, very good condition | |
300 | Liebherr LTM 1300-1 | 1999 | 12x8x10 | 14800/83500 | 60m/42m fixed jib/70m luffing jib | superlift "H" | |
300 | Demag AC 300 | 2000 | 12x8x8 | 9900/60000 | 59m/21m | hook - 147, 33, 11 ton, counterweight 100 ton | |
300 | Liebherr LTM 1300 | 2000 | 12x8x10 | n/d | 60m/42m | on request | |
300 | Demag AC 300 | 2001 | 12x8x10 | 5300/32000 | 59m/41m fixed/65m luffing | 2 winch, counterweight 100 ton, very good condition | |
300 | Liebherr LTM 1300 | 2001 | 12x8x10 | n/d | 60m | on request | |
300 | Demag AC 300 | 2002 | 12x8x10 | n/d | 59m/41m fixed/65m luffing | very good condition | |
300 | Liebherr LTM 1300 | 2003 | 12x8x10 | n/d | 60m/42m fixed jib/70m luffing jib | superlift | |
300 | Liebherr LTM 1300 | 2004 | 12x8x10 | n/d | 60m/21m | on request | |
300 | Liebherr LTM 1300 | 2006 | 12x8x10 | 3400/27000 | 60m/42m fixed jib/70m luffing jib | hook - 108, 71, 10,5 ton, very good condition | |
300 | Grove GMK 6300 | 2007 | 12x8x12 | 1800/14100 | 60m/19m | superlift | |
300 | Demag AC 300/6 | 2009 | 12x8x10 | n/d | 64m/51m fixed /72m luffing | hook - 124, 80, 35,8 ton, counterweight 117 ton, 2 winch, new | |
300 | Grove GMK 6300 | 2009 | 12x8x12 | 500/3200 | 60m/61m | as new | |
350 ton |
|||||||
350 | Demag AC 1200 | 1992 | 14x8x10 | n/d | 60m/84m luffing jib | counterweight 120 ton, good condition | |
350 | Demag AC 350 SSL | 2002 | 12x8x12 | -/43500 | 56m+49,5m/71,5m luffing jib | superlift V, tyres 70%, 2 winch, counterweight 142 ton | |
350 | Demag AC 350 SSL | 2004 | 12x8x12 | 5600/67000 | n/d | standard complete set | |
350 | Demag AC 350 SSL | 2005 | 12x8x12 | n/d | n/d | standard complete set | |
350 | Demag AC 350 SSL | 2007 | 12x8x12 | n/d | n/d | standard complete set | |
350 | Demag AC 350 SSL | 2009 | 12x8x12 | n/d | 56m/71m luffing jib/49,5m fixed | 2 winch, tyres on 20,5', ç hook + ball | |
400 ton |
|||||||
400 | Demag AC 1200 | 1993 | 16x8x12 | n/d | 58m | on request | |
400 | Liebherr LTM 1400 | 1995 | 16x8x12 | 8600/105600 | 50m | on request | |
400 | Liebherr LTM 1400 | 1995 | 16x8x12 | 13000/120000 | 50m/84m luffing/61m fixed | 2 winch, counterweight 125 ton | |
400 | Liebherr LTM 1400 | 1997 | 16x8x12 | 9900/67000 | 50m/84m | on request | |
400 | Liebherr LTM 1400 | 1997 | 16x8x12 | n/d | 50m/84m luffing/61m fixed | on request | |
400 | Liebherr LTM 1400 | 1998 | 16x8x12 | n/d | 50m/84m luffing/61m fixed | full full repairs on Liebherr 2008!!! Íîâàÿ painting, tyres, as new!!! | |
400 | Liebherr LTM 1400 | 2004 | 14x8x12 | 5200/26000 | 60m/56m hydraulic jib/84m luffing jib | 3 winch, hook -12,5, 34,7, 85, counterweight 140 ton, 200 ton, very good condition | |
400 | Liebherr LTM 1400 | 2005 | 14x8x12 | 2000/45000 | 60m/84m luffing jib | 3 winch, hook -12.5, 85, 200 ton, counterweight 140 ton | |
400 | Liebherr LTM 1400 | 2006 | 14x8x12 | 2250/18700 | 60m/63m luffing jib + superlift | counterweight 140 ton, 3 hook | |
400 | Liebherr LTM 1400-7.1 | 2007 | 14x8x12 | 1200/9500 | 60m/56m luffing jib | standard complete set | |
400 | Liebherr LTM 1400-7.1 | 2008 | 14x8x14 | n/d | 60m/56m hydraulic jib/84m luffing jib | counterweight 140 ton, new | |
400 | Liebherr LTM 1400-7.1 | 2009 | 14x8x14 | n/d | 60m/84m luffing jib | new | |
450 ton |
|||||||
450 | Grove GMK 7450 | 2003 | 14x8x12 | n/d | 60m/73m luffing jib + adapter 3m/70m fixed jib | counterweight 120+40 ton, 2 winch, 3 hookâûõ hook-block | |
450 | Grove GMK 7450 | 2004 | 14x8x12 | 5800/109700 | 60m/73m luffing/70 fixed | MEGA-WING-LIFT | |
450 | Grove GMK 7450 | 2005 | 14x8x12 | 6700/78500 | 60m/73m luffing/70 fixed | on request | |
450 | Grove GMK 7450 | 2009 | 14x8x12 | n/d | 60m/73m luffing jib + adapter 3m/70m fixed jib + superlift | 2 winch, counterweight 160 ton, hook - 200, 100, 40 ton, winter package, new | |
500 ton |
|||||||
500 | Demag AC 1600 | 1996 | 18x8x8 | n/d | n/d | standard complete set, superlift | |
500 | Demag AC 1600 | 1998 | 18x8x8 | 8500/33000 | 50m/68m fixed jib/ 90m luffing jib | superlift | |
500 | Demag AC 500-1 SSL | 1999 | 16x8x14 | 9700/41000 | 56m+30m/62m fixed jib/90m luffing jib | counterweight 180 ton, 2 winch, 4 hook, very good condition | |
500 | Liebherr LTM 1500 | 1999 | 16x8x12 | 9800/5800/119000 | 50m+84m/88m(S jib)+boom extension 14m | counterweight 120 ton, hook - 37, 84, 129 ton + ball, | |
500 | Liebherr LTM 1500 | 1999 | 16x8x12 | n/d | 50m/90m(S jib) | on request | |
500 | Liebherr LTM 1500 | 2000 | 16x8x12 | 6500/28200 | 84m boom+50m boom/91m(S jib) + adapter | 3 winch, 5 hookâ, superlift, counterweight 165 ton, Liccon 85% | |
500 | Demag AC 500-1 | 2000 | 16x8x14 | n/d | 56m/30m fixed | counterweight 180 ton, superlift | |
500 | Liebherr LTM 1500 | 2000 | 16x8x12 | 3400/56000 | 50m+63m/91m(S jib) | on request | |
500 | Demag AC 500-1 | 2000 | 16x8x14 | n/d | 56m/62m fixed jib/90m luffing jib | counterweight 180 ton, superlift | |
500 | Demag AC 500-1 | 2001 | 16x8x14 | 8500/28200 | 56m/92m luffing jib | superlift | |
500 | Demag AC 500-1 | 2002 | 16x8x14 | n/d | 56m+30m/62m fixed jib/90m luffing jib | 3 winch, counterweight 180 ton, hook - 40, 175 ton, special price!!! | |
500 | Liebherr LTM 1500 | 2002 | 16x8x12 | n/d | 50m/91m(S jib) | on request | |
500 | Liebherr LTM 1500 | 2003 | 16x8x12 | 5910/23000 | 50m+14m/88m(S jib)+boom extension 34m | on request | |
500 | Demag AC 500-2 SSL | 2005 | 16x8x14 | 4300/1600/39000 | 56m/62m fixed jib/90m luffing jib | superlift Y, counterweight 180 ton, 2 winch, 2 hookâûõ hook-block | |
500 | Liebherr LTM 1500 | 2006 | 16x8x12 | 2900/33500 | 50m/91m(S jib)+63m fixed + runner | 3 winch, superlift Y, counterweight 165 ton | |
500 | Liebherr LTM 1500-8.1 | 2007 | 16x8x12 | n/d | 84m + 50m/90m + superlift | on request | |
500 | Liebherr LTM 1500-8.1 | 2007 | 16x8x12 | 1800/18000 | 50m/49m luffing | SOLD | |
500 | Demag AC 500-2 SSL | 2008 | 16x8x14 | 800/3600 | 56m+30m/62m fixed jib/90m luffing jib | superlift Y, counterweight 180 ton, 2 winch, 3 hook | |
500 | Demag AC 500-2 SSL | 2009 | 16x8x14 | n/d | 56m+30m/62m fixed jib/90m luffing jib | superlift Y, counterweight 180 ton, 2 winch, 4 hookâûõ hook-block,new | |
550 ton |
|||||||
550 | Liebherr LG 1550 | 1999 | 16x8x12 | 7200/2200/37000 | 105m/92m | counterweight 410 ton, good condition | |
650 ton |
|||||||
650 | Demag AC 650 | 2000 | 18x8x16 | n/d | 60m/50m(S jib)/ 96m (luffing jib) | on request | |
700 ton |
|||||||
700 | Demag AC 700 | 2004 | 18x8x16 | n/d | 60m/36m(S jib)/ 96m(luffing jib) | tyres 70%, very good condition | |
700 | Demag AC 700 | 2008 | 18x8x16 | n/d | 60m/50m(S jib)/ 96m(luffing jib)/4m (adapter) | very good condition | |
700 | Demag AC 700 | 2009 | 18x8x16 | n/d | n/d | standard complete set, new | |
750 ton |
|||||||
750 | Liebherr LG 1750 | 2009 | 16x8x12 | n/d | n/d | windmill | |
800 ton |
|||||||
800 | Liebherr LTM 1800 | 1990 | 18x8x14 | 12900/59600 | 60m/36m | on request | |
1200 ton |
|||||||
1200 | Demag AC 1000 | 2009 | 18x8x16 | n/d | n/d | new | |
1200 | Liebherr LTM 11200-9.1 | 2010 | 18x10x14 | n/d | 100m/126m luffing | new |
If you have not found here the necessary crane simply ask it us - (+7-343)319-16-24
As you can see: some information does not get, but we can present any information on your request. Unlike our some competitors,
we have not exposed here any crane which can be found on car markets of Germany of type mobile.de. Almost
all our partners are involved in large international systems of sales of new and used lifting technics
or they works directly with manufacturers. The full list of their offers comes nearer to 1000 cranes
daily. Naturally, to process this list is unreally, therefore simply make in detail filled order
or send us a fax on number: (+ 7-343)-7091939 also receive the offer within 2-3 days. Also all our offers
will includes delivery from Germany or Europe (in case of absence of the suitable offer in Germany) within
2-6 weeks from the moment of an advance payment.
Cranes with capacity more 200 tons available for rent.
Cranes with capacity more 200 tons available for rent.
Select language: English |
Russian || Send message